PARTS & ACCESSORIES
DEVILBISS PRO-102-TE10-K TRANS-TECH AIR CAP
Item No
140026
Quantity
1 PIECE
This air cap is best for faster flow gloss/lacquer. All round gloss/clearcoat. Flow rate and fan pattern lend themselves towards a wetter application style. Compliant trans-tech high transfer efficiency.
Can be used with GTi Pro and GTi Pro Lite models.
-
High Efficiency air cap
-
Air Consumption: 270L/min
-
Pattern Height: 290-310mm
-
Aircap Material: Plated brass
-
Retaining Ring: Anodised Aluminium
-
Suits DeVilbiss GTIPRO and GTI Prolite gravity guns
DEVILBISS TE20 – TRANS-TACH – HIGH EFFICIENCY
Item No
140026-1
Quantity
1 PIECE
This air cap is best for faster flow gloss/lacquer. All round gloss/clearcoat. Flow rate and fan pattern lend themselves towards a wetter application style. Compliant trans-tech high transfer efficiency.
Can be used with GTi Pro and GTi Pro Lite models.
-
High Efficiency Air cap
-
Air Consumption: 360L/min
-
Pattern height: 285-300mm
-
Air cap material: Plated brass
-
Retianing Ring: Anodised Aluminium
-
Suits GTIPRO and GTI Prolite Gravity guns
DEVILBISS PRO-102-HV30-K HVLP AIR CAP
Item No
140026-2
Quantity
1 PIECE
This air cap delivers maximum transfer efficiency rates so is particularly suitable for waterborne and solvent basecoat application.
Can be used with GTi Pro and GTi Pro Lite models.
-
Suits DeVilbiss GTIPRO & PROLITE gravity guns
-
Air Consumption: 460L/min (16.3cfm)
-
Air-cap – Plated Brass
-
Retaining Ring – Anodised Aluminium
-
Pattern height – 300-325mm
DEVILBISS DMG AIR DRYER GUNS AND SYSTEMS
Item No
140026-3
Quantity
1 SET
-
A versatile system to speed up the drying process.
-
DMG guns multiply their intake by a factor of 7 to give generous air volumes.
-
A fully adjustable aerodry stand provides full dryer flexibility.
-
Solvent resistant for cleaning in gun wash machines.
-
DMG guns feature intake debris filters and shut off valves.
DEVILBISS MPV-623 FULL-FACE AIR-FED VISOR OUTFIT
Item No
140026-4
Quantity
1 SET
-
A single airline supplies breathing and spraying air.
-
Waistbelt incorporates odour filter and pre-set visor air regulator.
-
Breathing air is gentle and quietly dispersed through the tough, lightweight visor at a positive pressure.
-
Visor is supplied with both foam and fabric face seal cassettes.
-
The visor is hinged with adjustable crownstrap and ratchet headband.
-
Air Consumption: 7cfm
We recommend that all breathing air supplied to an air fed mask must be passed through a 2 or 3 stage filter to remove oil vapour and the contaminated water in compressed air, we list a number of options in our store / site.
Compressor must source air from an area that is not contaminated with paint spray.
Safety information:
To operate an air fed mask, you must supply air filtered down to at least 0.01 micron. Preferably use a 3-stage filter. Air must travel from the compressor to the mask through high flow type connectors e.g. euro, NOT standard british.
Information from http://www.hse.gov.uk/mvr/bodyshop/isocyanates.htm
Call us for further details.